You have a problem with your internat connectivity?
Immediately, the following steps:
A. Prepare your modem first.
2. Find a wire coil that contains aluminum or the like. (experiment itself yes)
3. Insert the wire was Liitan into your modem into the hole for the signal amplifier / you can wrap the components. (Please experimenting own)
4. After you install it and the wire was already long out of nancap tuh modem. Now you just make a wire wrapped into two parts on the right and left edges. Can be connected again at its end so as to form hurug "Y" .. / You know? In trying to ya!
5. In this way aims to look for signals that are around, supposing loghhh so ...
6. After that you go to the counter hp, buy a signal amplifier on the outboard.
7. Once you get a signal booster patch tool, and then paste it in your body behind your modem. It aims to maintain the signal power is obtained by using wire-wound had been.
8.Lakukan the following steps:
* Right click on My Computer
* Select Properties
* Then the HARDWARE tab-> Device manager
* Select the Ports -> Communication Port (double click on it and Open)
* Then
To the Port Settings and make some changes:
* In the "Bits per second" instead of a 128 000
* And "Flow control" option instead of a Hardware
* Apply and see the results.
9. Completed. Please try and see the results! Download Now ...
Please read also tips Second place is here ..
0 komentar:
Post a Comment